---
title: "Automated Fish Pond using Cayenne IoT Builder"
url: "https://maker.wiznet.io/Brija/projects/Automated-Fish-Pond-using-Cayenne-IoT-Builder/"
markdown_url: "https://maker.wiznet.io/Brija/projects/Automated-Fish-Pond-using-Cayenne-IoT-Builder/md"
type: "UCC: User Created Content"
author: "Brija"
author_url: "https://maker.wiznet.io/Brija/"
original_author: "Brija"
original_url: "https://dirakit.hackster.io/syahrial-rukmana/automated-fish-pond-using-cayenne-iot-builder-4513a8"
published: "2019-04-01"
language: "en"
hardware: ["Arduino UNO & Genuino UNO", "rduino Ethernet Shield 2", "Mini Servo", "DS18B20", "Breadboard (generic)", "Resistor 4.75k ohm"]
likes: 0
views: 404
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# Automated Fish Pond using Cayenne IoT Builder

> Automated Fish Pond using Cayenne IoT Builder

Original author: Brija (source: https://dirakit.hackster.io/syahrial-rukmana/automated-fish-pond-using-cayenne-iot-builder-4513a8)

## Components

- **Arduino UNO & Genuino UNO** x 1
- **rduino Ethernet Shield 2** x 1
- **Mini Servo** x 1
- **DS18B20** x 1
- **Breadboard (generic)** x 1
- **Resistor 4.75k ohm** x 1
- Software: **myDevices Cayenne**

## Article

If you raise fishes, I bet you will be interested in this project. It will make you raise fishes more easily !

---

Source: https://maker.wiznet.io/Brija/projects/Automated-Fish-Pond-using-Cayenne-IoT-Builder/