IOT New! Ethernet Shield W5500 for Arduino / Piranha
- Step 1: Prepare the materials
- Step 2: Connect to the hardware
- Step 3: Prepare the development environment
- Step 4: Software
- Step 5: How to start: Result
I know the RaspberryPi platform for the Internet of Things. The WIZ850io was recently published by WIZnet. So I implemented the RaspberryPi application by modifying the Ethernet SW because I can easily process the source code. Test the device platform driver via RaspberryPi and WIZ850io. See next step.
Youtube video: https://youtu.be/Hi_NZMjEct8
Step 1: Prepare the materials
Please note the following.
1. Raspberry Pi 3 starter kit
3. UART2USB adapter
4. LAN cable
5. USB cable
Step 2: Connect to the hardware
Connect a USB, LAN, WIZ850io and UART2USB adapter.
More information on HW can be found on the next page.
Step 3: Prepare the development environment
Raspberry Pi 3
Step 4: Software
Linux kernel: a device driver for the WIZnet platform
I changed the menuconfig to use the WIZnet platform driver as a module type.
Step 5: How to start: Result
I copied the w5100, w5100-spi models to the Raspberry Pi.