Smart Home Control

In this project, we will learn to create a basic Smart Home system where we can control different appliances via an app on our phones. We can also get real-time sensor readings via the same. We will be using an LED connected to the STM32 to demonstrate the workings of this project.
ORIGINAL POST
By VLAB IOTIFY
components
Hardware Components
W5500
X 1
details

stm_smart_home.gif comparing-measurements-1024x4611 test3 test2 test1 web_page4 web_page3 web_page2 web_page w5100 sct013 arduino-uno comparing-measurements-1024x461 comparing-measurements-1024x461

We are living in an increasingly connected world. One where our devices from lights to computers are all connected to the internet. This has led to an increase in Smart Home products, which can be controlled remotely via our phones.

In this project, we will learn to create a basic Smart Home system where we can control different appliances via an app on our phones. We can also get real-time sensor readings via the same. We will be using an LED connected to the STM32 to demonstrate the workings of this project.

We will use MQTT to connect the app on our phone to the smart appliances.

Project prerequisites are described here: https://docs.vlab.iotify.io/stm32-projects/smart-home-control/prerequisite-for-smart-home-control

Details about project implementation can be found here: https://docs.vlab.iotify.io/stm32-projects/smart-home-control/implementing-the-smart-home-control-project

COMMENTS

Please Login to comment
  Subscribe  
Notify of
POSTED BY
TAGS