LAN Module W5500 with POE

Base PoE is an M5 Base that implements a W5500 Ethernet controller chip with PoE module, which provides Hardwired TCP/IP embedded Ethernet control to facilitate easier internet connection to embedded systems.
introduction
Base PoE is an M5 Base that implements a W5500 Ethernet controller chip with PoE module, which provides Hardwired TCP/IP embedded Ethernet control to facilitate easier internet connection to embedded systems. W5500 integrates TCP/IP protocol stack, 10/100M Ethernet data link layer (MAC) and physical layer (PHY). This base supports RS485 / RS232 communication and can be used as an Ethernet to serial port server. It is specifically designed for industrial applications. PoE (Power over Ethernet) technology is supported. Through the built-in PoE module, power can be directly supplied to the base through PoE hub/switch without a separate power supply. It comes with a couple of HT3.96 connectors, metal rail, and magnet discs for easy installation. The 6 pins of the HT3.96 connector are spare, you can wire them up with an RS485 or RS232 adapter board as you like.
features
  • Support PoE IEEE802.3 AF/AT
  • DC input supply voltage: 9-24V
  • Ethernet access
  • HT3.96 port for supporting RS485/RS232 communication
  • 8 independent hardware socket simultaneous communication
  • Support TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE protocols
  • Support integrated 10BaseT / 100Base-T Ethernet PHY
  • Easy to fix on the wall
technical details

Include

  • 1x PoE Base
  • 1x TTL-to-RS485 adapter board
  • 1x TTL-to-RS232 adapter board
  • 1x pin header 20pin
  • 1x metal rails and magnet discs
  • 3x HT3.96 terminal
    • 2x 3pin
    • 1x 4pin
  • 10x cold crimp terminal(red Copper Lugs)
  • 3x Allen wrench
    • 1x 1.5mm
    • 1x 2mm
    • 1x 2.5mm
  • 2x hexagon socket head cap screws M3x28
  • 4x hexagon socket tapping screw KA2x4
  • 1x countersunk head screw M3x8

how to use

1_2081d11b-0428-4533-b893-bf1942267766_1200x1200.jpg

Specification

ResourcesParameter
Ethernet chipW5500
Support protocolsTCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
RS485 chipSP3485EE
RS232 chipMAX232
PoE power supply modeIdle network cable pin power supply(10M/100M Ethernet),J4&J5(VC-), J7&J8(VC+)
PoE specificationIEEE802.3 AF/AT
DC input voltage9V~24V
Net weight32g
Gross weight132g
Product size54*54*28mm
Package Size105*65*4mm

COMMENTS

Please Login to comment
  Subscribe  
Notify of