Ethernet Shield node
In the simplest case, when you have a stock Ethernet Shield board and it’s the only DIY-device in your local network it is enough to place a single
xod-dev/w5500/ethernet-shield on your patch.
The node has a
CONN pulse which initiates the connection process. Make sure the
CONN is bound to
On Boot so that the shield tries to connect to the router when the program starts.
The node outputs
INET which represents the resulting internet connection along with
ERRpulses which fire on success or failure.
Original link: https://xod.io/docs/guide/w5500-connect/