Adding ethernet connectivity to a STM32-Nucleo

Adding ethernet connectivity to a STM32-Nucleo
ORIGINAL POST
By Carmine Noviello
components
Hardware Components
details

stm32-nucleo-ethernet-shield-660x330.jpg

Strongly RECOMMEND this article!!

This article shows how to use the Arduino Ethernet shield on a STM32 Nucleo board with all the required hardware configuration steps.

eth shield_bb

The author also shows how to import the WIZNet ioLibrary inside a fresh new STM32 project and how to configure the library to start working with this shield.

Schermata 2015-08-13 alle 19.40.10

For more details, please visit the original article and READ all!!

See the following for more codes and materials.

 

documents
Code
GitHub

COMMENTS

Please Login to comment
  Subscribe  
Notify of