ProDino Zero GSM Ethernet

The board is powered by Atmel’s SAMD21 MCU, which features a 32-bit ARM Cortex® M0+ core, SARAU201 GSM module W5500 Ethernet chip.
ORIGINAL POST
By KMP Electronics
components
Hardware Components
X 1
Software Apps and online services
details

ProDino-MKR-Eth-GSM_2-Top.jpg

Getting started


You can find in the Tutorial section all the information you need to configure your board, use the Arduino Software (IDE), and start tinker with coding and electronics. What you can do with this board see in our Examples.

Features 


  • ATSAMD21G18 Microprocessor, 32-Bit ARM Cortex® M0+
  • SARAU201 GSM module
  • W5500 Ethernet chip
  • 1 x GROVE connector
  • 4 Relays Output
  • Pluggable connectors
  • 4 Optical Isolated Inputs 
  • RS485 port 
  • Switching Regulators power supply
  • Arduino MKR GSM1400 compatible

Specification


  • mP, DC Current per I/O Pin 7 mA
  • Clock speed 48 MHz  
  • SRAM 32 KB
  • 256 KB Flash Memory
  • GSM global regions UMTS/HSPA: 800 / 850 / 900 / 1900 / 2100 Mhz
  • Ethernet 802.3 10/100 Mbit/s
  • RS485 speed 500 Kbps (short distance)
  • Optical isolated digital Inputs: 4 (working voltage 3-30 V, On arrives form 3 V)
  • Relay outputs: 4 (maximum voltage/current 250V/5A)
  • Input Voltage: (Vin) 8 – 30 V
  • Dimension: 70 mm X 92 mm X 48 mm
  • Weight: 152 g
ProDino MKR GSM Ethernet V1 board top

 

documents
Code
Schematics
Others

COMMENTS

Please Login to comment
  Subscribe  
Notify of