RobotDyn Leonardo ETH(V2) with ATmega32U4 & W5500 Ethernet

RobotDyn Leonardo ETH(V2) features two devices on one board
ORIGINAL POST
By Unknown
details

RobotDyn Leonardo ETH(V2) with ATmega32U4 & W5500 Ethernet

 

robotdyn_leonardo-ethernetw5500-v2

Overview

RobotDyn Leonardo ETH(V2) is a fully featured Ethernet-connected device.

RobotDyn Leonardo ETH(V2) features two devices on one board: Leonardo based on an ATmega32U4 and Ethernet controller based on WizNet W5500 TCP/IP. It also has an optional PoE function.

In a server role, it will receive requests from other devices and services in local network and internet, and respond or react accordingly.

In a net member role, the RobotDyn Leonardo ETH(V2) can collect data from different devices or industrial equipment and send it through the local network or Internet.

 

Details can be found at the link below.

https://robotdyn.com/leonardo-eth-v2-with-atmega32u4-ethernet-w5500-arduino-compatible-board.html#custom-2

 

Specifications

Leonardo ETH V2

Input Voltage (VIN/DC jack)7~24V
Power IN (USB)5V-limit 500mA
Power IN (PoE)Optional module, 48V(Input), 9V(Output)
Digital I/O23
PWM Output7
Analog I/O12
Reserved Pins
  • D4 is used for SD card select;
  • D9 is used for SD card detect;
  • D10 is used for W5500
  • D14,D15,D16 are used for SPI.
  • *Optional: D8 is used for W5500 interrupting, D11 is used for W5500 initialisation
USB socketMicro-USB
Ethernet socketRJ45
PCB Size53.3×68.6mm
Card ReaderMicro SD card, with logic level convertor
Weight41g

 

 

 

 

 

 

COMMENTS

Please Login to comment
  Subscribe  
Notify of