Control your Home Lights using the Twitter platform.
This post introduces how to use WIZnet chip solution such like as W3100A, W5100, W5200, W5300, and W5500 with BASIC source code on BASCOM-AVR & BASCOM-8051.
BASCOM-AVR & BASCOM-8051 are BASIC complier & IDE development tools. These can implement with BASIC source code on WIZnet chip solutions.
This project shows how to monitor the condition of plant using temperature sensor, illumination sensor, and soil sensor and water the plant using water pump.
If your Feather board is going to be part of a permanent installation, this Ethernet FeatherWing will let you add quick and easy wired Internet.
This project will guide you through the steps needed to set up your Arduino Uno board with your HTU21D sensor, deploying a sketch that reads data from the sensor and sends it into your Thingworx Platform and last how to build a mashup displaying and processing the data sent from the sensor.
This example shows how to deal with multiple ArtNet DMX 512 universes using Teensy 3.2, WizNet 820io and FastLED to light up an LED array using output data from Resolume.
Turn on LED On/Off from the internet using Arduino UNO R3 based Web server.
This project uses Arduino with Ethernet shield, to check the soil moisture level and when to water the plant.
Electricity, gas and water are typically some of the largest regular expenses in any household.
When I took a trip, I was wondering how long it takes the water temperature to maintain the balance of the outside temperature.