How to use WIZnet Chip set such as W5100, W5200, W5300, and W5500 with Basic source code

details

How to use WIZnet Chip set such as W5100, W5200, W5300, and W5500 with Basic source code

by MCS electronics



Overview

This post introduces how to use WIZnet chip solution such like as W3100A, W5100, W5200, W5300, and W5500 with BASIC source code on BASCOM-AVR & BASCOM-8051.
BASCOM-AVR & BASCOM-8051 are BASIC complier & IDE development tools. These can implement with BASIC source code on WIZnet chip solutions.

CONFIG TCPIP

  • Syntax W3100A
    CONFIG TCPIP = int , MAC = mac , IP = ip, SUBMASK = mask, GATEWAY = gateway, LOCALPORT= port, TX= tx, RX= rx , NOINIT= 0|1 [, TWI=address] [, Clock = speed] [, baseaddress = address] [,TimeOut=tmOut] [,CHIP=W3100A] 
    
  • Syntax W5100
    CONFIG TCPIP = int , MAC = mac , IP = ip, SUBMASK = mask, GATEWAY = gateway, LOCALPORT= port, TX= tx, RX= rx , NOINIT= 0|1 [, baseaddress = address] [,TimeOut=tmOut] [,CHIP=5100] [,SPI=spi] [,INT=imsg] [,CS=cs] [,NOUDP=noudp]

  • Syntax W5200
    CONFIG TCPIP = int , MAC = mac , IP = ip, SUBMASK = mask, GATEWAY = gateway, LOCALPORT= port, NOINIT= 0|1 [,TimeOut=tmOut] [,CHIP=W5200] [,SPI=spi] [,INT=imsg] [,CS=cs] [,NOUDP=noudp] [TXn= tx] [, RXn= rx] 
    
  • Syntax W5300
    CONFIG TCPIP = int , MAC = mac , IP = ip, SUBMASK = mask, GATEWAY = gateway, LOCALPORT= port, NOINIT= 0|1 [, baseaddress = address] [,TimeOut=tmOut] [,CHIP=W5300] [,INT=imsg] [,NOUDP=noudp] [align=align] [TXn= tx] [, RXn= rx] [SOCKMEM=sockmem] 
    
  • Syntax W5500
    CONFIG TCPIP = NOINT , MAC = mac , IP = ip, SUBMASK = mask, GATEWAY = gateway, LOCALPORT= port, NOINIT= 0|1 [,TimeOut=tmOut] [,CHIP=W5500] [,SPI=spi] [,INT=imsg] [,CS=cs] [,NOUDP=noudp] [TXn= tx] [, RXn= rx] 
    

Learn More

Goto Original

COMMENTS

Please Login to comment
  Subscribe  
Notify of