DIY Arduino Home Automation with Ethernet Shield and Arduino Mega

details

So today I will introduce this project realized with the Arduino Mega board and the Ethernet Shield, two low-cost devices that will allow us, through the ethernet connection with our ADSL home, on and off the remote devices via wi fi and connection with IP.
Inserting IP l`indirizzo on any device connected to the network will open an HTML page that will allow us to select the devices.

I will guide you step by step to the realization of the project with photos and descriptions if you have any questions or concerns feel free to contact us using the form at the bottom of the page or the contact section.
Let’s start with the tutorial that follows that of home automation controlled by Arduino one from bluetooth .
First insert the Ethernet Shield on Arduino Mega board as in the figure, connect the Ethernet cable to the shield and the USB cable to the PC.

The USB cable is used only for programming, so once you entered the sketch of Arduino Mega you can feed all via an external power supply.

original : http://www.progettiarduino.com/arduino-ethernet-shield-domotica-controllo-pin.html

 

COMMENTS

Please Login to comment
  Subscribe  
Notify of