The author in this project made use of Arduino + Ethernet Shield and web hosting for easy implementation of home automation
This Article is one of the examples web client. Setup, Examle data source, Reading indata to Arduino have been written in the order. it seems to be good for the people who first start the ethernet application.
The first practical project that I put together was a web interface to control my garage door.
The project shows how to modify the standard Ethernet Library of Arduino
ARM7TMDI with W5300 Module
This project shows how to create airplane piloting simulator by the name of Baron 58.
Control multiple Relay via internet with Arduino and Arduino Ethernet Shield
The Ethernet controller of this Ethernet Shield is W5200. it is twice the buffer size of W5100 and support for up to eight simultaneous TCP/UDP connections. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. Thanks to a lowered RJ45 pot, you can flexibly add most shields on top of this Ethernet Shield.
Turns the lamp on, cycle down the disco modes to reach white, turn off, wait for the sensor to detect movement, turn on the lamp, and keep checking to see if there is any further movement before turning off again after a few seconds.
DIY Smart Home Sensors with Arduino, MySensors and OpenHAB