How to monitor a remote equipment by WIZwiki platform

details

How to monitor a remote equipment by WIZwiki platform
by bingdo72 on May 26, 2015

WIZwiki-w7500_platform

Intro: How to monitor a remote equipment by WIZwiki platform

I know WIZ550S2E solution for monitoring. Recently WIZwiki-W7500 platform was announced by WIZnet. So I implemented a firmware of WIZwiki-W7500 by
WIZ550S2E SW modification because I can handle a source code easily.
You can know the status of equipment even if it is so far. Please refer to the following step.
Step 1: Prepare materials
Please refer to the following.
1. WIZwiki-W7500 board. ( http://www.shopwiznet.com/wizwiki-7500 )
2. Mini USB cable
3. LAN cable
http://www.instructables.com/id/How-to-monitor-a-remote-equipment-by-WIZwiki-platf/

WIZwiki-W7500_platform_2
Step 2: Hardware connection
Please connect an USB cable and LAN cable.
You can get more HW info by the following site.

http://wizwiki.net/wiki/doku.php?id=products:wizwiki_w7500:start

WIZwiki-W7500_image6
Step 3: Prepare development environment
I prepared GCC development environment by the following site.
http://wiznetian.com/how-to-build-a-development-environment-with-gnu-arm-java-jdk-eclipse-cygwin/
I installed GNU Toolchain, Java JDK, Eclipse, Cygwin.
If you install all tools, you are ready for running this project.
You can use a Configuration Tool by the following site temporarily.
http://wizwiki.net/wiki/doku.php?id=products:wiz550s2e:wiz550s2e_download
How to use a CFG tool : http://wizwiki.net/wiki/doku.php?id=products:wiz550s2e:wiz550s2epg_en#configuration_tool
<Reference>
WIZ550S2E source repository : https://github.com/Wiznet/WIZ550S2E
WIZwiki-W7500 library source : http://wizwiki.net/wiki/doku.php?id=products:w7500:library
Instructables : http://www.instructables.com/id/How-to-monitor-a-remote-equipment-by-WIZwiki-platf/
Step 4: Software : GitHub repository
I opened source codes of this project in GitHub.
https://github.com/bingdo/S2EApp_WIZwiki-W7500_Eclipse
You can download this project files. And then import project into Eclipse.
After compile, you can run S2E application of WIZwiki-W7500.
This project is open for everyone. I expect your participation to improve a quality of project.

2015-05-27_S2EApp_WIZwiki-W7500_GitHub

https://www.youtube.com/watch?v=vneN8Qn6WRA
Step 5: How to run : Test result
1. To program FW into a target.
2. To reset a target and insert MAC address.
3. To search a target by Configuration Tool.
4. To check Host IP and start Server.
5. To change IP, Gateway, HostIP properly.
6. To change Working Mode of target to TCP Client or Mixed by CFG tool.
7. Send “hello” to Server through terminal program.
You can see the test result by the video.
Thank you for your attention.
*Tip : If you register in www.wiznetian.com and work actively, you can get a sample cheaper than E-sales as well as a free sample.
https://www.youtube.com/watch?v=9s8l1P7m2xo

 

Source : http://www.instructables.com/id/How-to-monitor-a-remote-equipment-by-WIZwiki-platf/

COMMENTS

Please Login to comment
  Subscribe  
Notify of