Convert your POP/Drink Machine to use RFID with Arduino
This project is about a vending machine controlled by RFID cash system & Arduino.
How to implement FTP server using W5500-EVB
This tutorial explains how to implement and test the FTP server code which has been released by WIZnet
Using the Arduino Ethernet shield with AMICUS18 (Part 1~4)
This explains how to use the Arduino Ethernet Shield with AMICUS18 Open source hardware board based on PIC MCU and how to develop with CrownHill’s Proton BASIC.
Introducing OSWIN, the Open Source Wireless IoT Node
This post is about OSWIN using the ATmega1284P with the WIZ820io .
W5100-SPI board “Pistachio”
This is a very small SPI connected Ethernet TCP/IP module using the WIZnet W5100 chip. W5100 is a hardwired TCP/IP processor.
WizFi250 GPIO & ADC with Smartphone
In this posting, we are introducing an example code to control the LED & read the value of variable resistor of WizFi250-EVB. Without additional MCU board, a smart phone App directly connects to WizFi250-EVB and controls GPIOs.
IoT5500 LanJack
The Internet of Things embedded Ethernet connectivity module IoT5500 comes in a very compact footprint, barely any larger than the Ethernet socket.
Arduino Android communication through Modbus TCP
The project share with you today is how to communicate between Arduino and Android through Modbus TCP
Water Level Sensor with Arduino Ethernet
This project implements a network connected water level sensor, measuring the level in the sump pit of one’s house. It’s connected to the home network and reports the water level by broadcasting UDP packets so that any computer can receive it and take action, such as sending out an alert or storing statistics.
THE GITHUB STOPLIGHT
The idea was that when they check code into their continuous integration system (see defunkt/CI Joe) the stoplight would turn yellow while the code was building, red if the build failed because of failing tests, and green if the build succeeded.