“Autohome” – a web-based GUI for Arduino-powered Home Automation

details

In Freetronics, the AutoHome was introduced.

“Autohome” – a web-based GUI for Arduino-powered Home Automation

The Arduino platform lends itself well to getting into the world of home automation (check our SuperHouse.tv) and many enthusiasts have created their own systems. However one home system by Arduino forum member OhmMega is of interest due to the controls and possibilities.

The web-based GUI project can be found in the the Arduino Forum.

 

Author of the web-based GUI setup a Mega 2560 with WIZnet W5100 to run a 4 relay board (thermostat for furnace and air conditioner).

AutoHome - Web based GUI
AutoHome – Web based GUI

 

Mega 2560 with WIZnet W5100 to run a 4 relay board
Mega 2560 with WIZnet W5100 to run a 4 relay board

 

 

The author puts the Arduino Sketch source for this application on the GitHub.

https://github.com/bkaltec/AutoHome/tree/master

 

The author made a mobile page which can be viewed on a phone or tablet.

But the source code was not posted yet because it is on-going project.

Different from the first prototype in the above, it looks that author made another prototype (Arduino and Arduino Ethernet Shield and Arduino Proto Shield) instead of Mega2560.

 

mobile page
mobile page

 

Arduino Ethernet Shield for AutoHome
Arduino Ethernet Shield for AutoHome

 

If this GUI is released, then it will help many DIY people who are going to make Home Automation with Arduino.

 

Refer to the link below.

http://forum.arduino.cc/index.php?topic=253778.0

 

Source: 

https://www.freetronics.com.au/blogs/news/16619205-autohome-a-web-based-gui-for-arduino-powered-home-automation#.XGvCdqIvMkk

COMMENTS

Please Login to comment
  Subscribe  
Notify of