W5500 Ethernet Shield v1.0 – seeed

details

W5500_Interface

W5500 Ethernet Shield is an IoT panel,you can receive and send data from anywhere in the world with an internet connection by it,It included SD slot enables applications that require storing large amounts of data, like IoT data logging. Thanks to a lowered RJ45 port, you can flexibly add most of shields on top of this Ethernet Shield.This module’s power consumption is lower than other ethernet shields.W5500 Ethernet Shield is based on W5500,The W5500 chip is a Hardwired TCP/IP embedded Ethernet controller that provides easier Internet connection to embedded systems. W5500 enables users to have the Internet connectivity in their applications just by using the single chip in which TCP/IP stack, 10/100 Ethernet MAC and PHY embedded.

 

Features

  • Supports Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
  • Supports 8 independent sockets simultaneously
  • Supports Power down mode
  • Supports Wake on LAN over UDP
  • Supports High Speed Serial Peripheral Interface(SPI MODE 0, 3)
  • Internal 32Kbytes Memory for TX/RX Buffers
  • 10BaseT/100BaseTX Ethernet PHY embedded
  • Supports Auto Negotiation (Full and half duplex, 10 and 100* based )
  • Not supports IP Fragmentation
  • 3.3V operation with 5V I/O signal tolerance
  • LED outputs (Full/Half duplex, Link, Speed, Active)
  • Micro-SD card socket
  • Grove connector for I2C and UART

 

COMMENTS

Please Login to comment
  Subscribe  
Notify of