Bonjour/Zeroconf with Arduino
This post implemented Bonjour with Arduino. Bonjour is Apple’s implementation of Zero-configuration networking(Zeroconf)
Arduino Aquaponics: EnvDAQ with Water Temperature Sensor
The Environment DAQ is an open source Arduino shield used to track air temperature, relative humidity and light in aquaponic and hydroponic grow beds.
W5500 Application Example with Swordfish BASIC
The author implemented HTTP Server and SOAP Web Service with WIZ550io (Network module based on W5500) and PIC MCU.
Barley’s automated cat feeder
This is an auger-based automatic cat feeder. Several pounds of cat food are stored in the reservoir above the auger, and the feeder is programmed to automatically dispense 1/4-cup of food in the morning and in the evening.
Botman – my homegrown home automater
Maker uses “Arduino Ethernet Shield” acting as a web server and as web client when it pulls data from APIs.
An Simple IoT example – connected CO2 Sensor with WIZ550S2E
This IoT example shows how to connect CO2 sensor to your ethernet network, and how to send sensing data by using Serial-to-Ethernet gateway module as UDP client
Arduino Compatible Bathtub Controller
This Home Automation project shows us that being able to control the amount of water in the home bathtub as Home Automation application using Arduino Ethernet Shield.
An Internet music player pt1~3 (interfacing WIZ550io to GA144)
The idea is to read 1152 16-bit, 44.1KHz PCM samples, split the samples into 32 frequency bands, run an FFT over the samples to work out
W5500 ethernet shield for Firewing Info PIC24/PIC32
This is the W5500 Application posted in the firewing.info site. This library allow the use of the WIZnet / WIZ550io in Firewing that mount W5500 ethernet chip.
CUBE-0 Lite
This simple-to-build, simple to use configuration can be used to get internal and external temperature, humidity and light information collected